In this article, we are going to talk about a subject that can be of use to all of us. If it’s because you have a flat tire, or you want to change your brake pads, knowing where the jack is on a Bmw Z4 is important. In truth, without the jack, you won’t have the ability to lift your car and consequently change a wheel, or, access the components behind it such as the brake pads for example. To get this done, we will first show you the different types of jacks, then, where the jack is on an Bmw Z4, and finally, how to use the jack on your car.
What are the different types of jacks for Bmw Z4?
So we start our article with the different types of jacks that exist. In truth, although generally most Bmw Z4 will be equipped with the same sort of jack, there are still different styles with different uses, here they are:
- The single-arm screw jack for Bmw Z4 : The first type of jack, the most traditional and cheapest of all, is generally found on entry-level models, or with few options. This sort of jack has just one articulated arm that is positioned under the car to lift it. This sort of jack is light, easy to use, but does not enable you to lift large loads.
- The double-arm screw jack for Bmw Z4 : It uses precisely the same principle as the jack seen earlier, that is, a worm screw that will enable screwing to raise the jack, and unscrewing to lower it, however the use of a double arm will enable to have a more stable jack that can lift a higher payload.
- The hydraulic jack for Bmw Z4 : This form of jack is not standard equipment on cars, and is usually just supplied with a premium model or bought in car centres. These jacks are heavier, generally less bulky and have the advantage of being much less difficult to utilise and able to lift a larger load. It would cost between 20 and 50 euros to buy them, here is a simple and effective model from Oscaro.
.
Where is the jack on Bmw Z4?
We will now start the part that absolutely done you come to this article, where is the jack on a Bmw Z4? It might seem basic, but based on the car produce and model the location of the jack is not the same. Take note that most Bmw Z4 cars are supplied with a jack, if they are not you will have to find a puncture-proof spray or a compressor instead. If you have just bought your Bmw Z4 or have been loaned one, or are renting it, you may possibly not have this information. We are going to give you the different locations of the jack on your car, these locations may possibly change based on the year and the finish of your Bmw Z4:
- The most basic position for a jack is in the trunk of your Bmw Z4. To reach it, just lift the carpet in the trunk and you should find it and the spare tire.
- In the rear wheel arch: Similar but less traditional position, your jack might be in your trunk, but on the side of the trunk, to reach it you just have to open the hatch in the right part of your trunk.
- Last possible location for the jack on your Bmw Z4 is under your car. If you still have the spare tire you will discover it under your trunk, in most cases you will have to unscrew a nut to have the ability to release it and the spare tire.
How to use the jack on a Bmw Z4?
Finally, we will quickly show you how to use the jack on your Bmw Z4. If it is to change your wheel or to change the brake pads of your Bmw Z4, the procedure remains the same. This procedure might seem complex, but you just need to follow a few recommendations to use your jack safely:
- Before lifting your Bmw Z4, remember to engage the handbrake as well as a gear to lock your wheels.
- Unscrew the wheel nuts of the wheels you want to work on before lifting the car, otherwise you risk damaging the transmission.
- Start to lift your jack (about 20 centimeters) and position it under your car at the level of the underbody, you will in most cases discover a notch to position it in the right place.
- Raise your Bmw Z4, don’t bother doing it much, if your tire comes off three inches off the ground that’s enough.
To find more tips on the Bmw Z4, take a look at the Bmw Z4 category.
