Regardless whether it’s for your own safety, for roadworthiness evaluation or for your wallet, ensuring that your headlight bulbs are all the time functioning is extremely important. Actually, bulbs are wearing parts that will obviously burn out over time and consequently need to be changed. You’re likely in this article because one of your headlights is burnt out and you’re wanting to know how to change the bulb of the fog lights on your Bmw Z4, we’ve created this article to help you do this process without help and not need to go to your mechanic. To start with ,, we will look at chaging the front fog light bulb of your Bmw Z4 and secondly, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Bmw Z4?
We are going to begin this article with the replacing the front fog light bulb of your Bmw Z4, take note that dependant upon the year and the finish of your car it may not be the same process to use, that’s why we are going to give you the two most common solutions to change the front fog light bulb of your vehicle.
Change the front fog light bulb of your Bmw Z4 without removing the bumper.
First technique, we will change the bulb without removing the bumper of your car. Even though this approach is the least difficult, there is no assurance that you can perform it on your vehicle. Actually, dependant upon the options and the year, on some models there will not be enough room for you to change the bulb in this manner. Here are the two different methods to change the front fog lamp bulb of your Bmw Z4:
- By going under the bumper of your Bmw Z4: First approach, you will put yourself under your vehicle, don’t hesitate to raise it with a jack if you don’t have enough room under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that protects your engine motor and that rests on your bumper, you will have access to the fog light block of your Bmw Z4 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your Bmw Z4
- By removing the wheel arch: Second alternative, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To get this done, jack your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and perform the same process as mentioned earlier to change the bulb of the fog light of your Bmw Z4.
How to change the front fog light bulb of your Bmw Z4 by removing the bumper?
We will at this point check out the circumstance where you are obliged by lack of room on your car model to remove the bumper of your Bmw Z4 to be able to access the front fog light bulb of your car. To do this, you will first have to remove the front bumper of your Bmw Z4, do not think twice to read our complete instruction to know the exact technique, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your vehicle. Once the bumper has been removed, you will only need to access the front fog lamp block and change the fog lamp bulb on your Bmw Z4 in the same technique as stated earlier.
How to change the rear fog light bulb on your Bmw Z4?
To finish, if you wish to change the rear fog bulb of your car the process is much simpler, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Bmw Z4.
- After locating the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your Bmw Z4
- Put everything back again
Examine that your fog lights are working correctly again before you hit the road and you’re done.
To discover more tips on the Bmw Z4, take a look at the Bmw Z4 category.
.
