The safety of a car is essential. Whether or not the Nissan NV200 are economic holes, certain routine service works are vital. Today we will explain to you when to change the brake discs of your Nissan NV200? To do this, first of all, we will discover what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Nissan NV200, and, finally, how to replace them with new ones.
Interest of the brake discs of a Nissan NV200
We start our article by detailing what the brake discs of a Nissan NV200 are used for, it will enable you to understand why it is essential to ensure that they are always in good functioning conditions.
Brake discs are the main part of your braking system. Obviously, braking on an Nissan NV200 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will trigger your Nissan NV200 to brake.
When to change the brake discs of a Nissan NV200?
We will now proceed to the section that certainly attracts you to this content page, namely, when changing the brake discs of a Nissan NV200? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing auto parts and they will, as time passes and especially the friction when braking wears out and loses braking power. We will now highlight the different techniques to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Nissan NV200 , nevertheless it is essential to know that according to your driving style and the type of journey this can change significantly. Indeed, if you specifically drive on the motorway and your brakes are just slightly used, this amount can increase, in contrast, if you just drive in built-up areas, it can decrease.
- A basic and good method to identify the condition of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A simple visual method to know when to change the brake discs on your Nissan NV200 is to remove the wheels after the vehicle has been set on stands. Once taken off, you will be able to access your discs and verify their condition. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Nissan NV200?
Finally, to conclude this content page we will fairly quickly explain how to change the brake discs of your Nissan NV200. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Nissan NV200, don’t hesitate to seek advice from our content page which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Nissan NV200 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you want more guides on the Nissan NV200, go to our Nissan NV200 category.
