The safety of a motor vehicle is essential. Regardless if the Kia Niro are economic holes, certain routine service acts are vital. Today we will explain to you when to change the brake discs of your Kia Niro? To get this done, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Kia Niro, and, finally, how to change them with new ones.
Interest of the brake discs of a Kia Niro
We start our content page by explaining what the brake discs of a Kia Niro are used for, it will allow you to discover why it is necessary to ensure that they are constantly in good functioning order.
Brake discs are the main part of your braking system. In actual fact, braking on an Kia Niro is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will bring about your Kia Niro to brake.
When to change the brake discs of a Kia Niro?
We will now move on to the section that certainly attracts you to this content, namely, when replacing the brake discs of a Kia Niro? How we mentioned it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now highlight the different solutions to know when to change them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Kia Niro , however it is necessary to know that according to your driving style and the type of journey this can change significantly. In truth, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, alternatively, if you only drive in built-up areas, it can reduce.
- A simple and powerful method to identify the state of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A basic visual method to know when to change the brake discs on your Kia Niro is to remove the wheels after the car has been set on stands. Once taken out, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Kia Niro?
Finally, to conclude this content we will fairly quickly explain how to change the brake discs of your Kia Niro. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Kia Niro, don’t think twice to consult our content which points out you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Kia Niro on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
If you have any additional questions about the Kia Niro, do not hesitate to consult our Kia Niro category.
