The safety of a motor vehicle is essential. Even if the Audi A6 are financial holes, certain maintenance works are essential. Today we will explain to you when to change the brake discs of your Audi A6? To get this done, to begin with, we will find out what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Audi A6, and, finally, how to change them with new ones.
Interest of the brake discs of a Audi A6
We begin our content page by detailing what the brake discs of a Audi A6 are used for, it will enable you to understand why it is important to be certain that they are constantly in good functioning order.
Brake discs are the most important part of your braking system. In actual fact, braking on an Audi A6 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Audi A6 to brake.
When to change the brake discs of a Audi A6?
We will now move on to the section that certainly attracts you to this content page, namely, when replacing the brake discs of a Audi A6? How we explained it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing auto parts and they will, with time and specifically the friction when braking wears out and loses braking power. We will now highlight the different methods to know when to change them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Audi A6 , nevertheless it is important to know that depending on your driving style and the type of journey this can change significantly. Indeed, if you mainly drive on the motorway and your brakes are only slightly used, this value can increase, on the other hand, if you only drive in built-up areas, it can decrease.
- A simple and successful technique to identify the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual technique to know when to change the brake discs on your Audi A6 is to remove the wheels after the vehicle has been set on stands. Once removed, you will have the ability to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
How to change the brake discs on your Audi A6?
Finally, to end this content page we will fairly quickly show you how to change the brake discs of your Audi A6. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Audi A6, don’t think twice to seek advice from our content page which explains you how to make this change.
As far as changing discs is concerned, here are the most important steps to follow:
- Put your Audi A6 on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
To get more tips on the Audi A6, take a look at the Audi A6 category.