If you’re a bit of a do-it-yourselfer, you’re almost certainly wanting to look after most of the work to be achieved on your Ford C-max 2, but some are more complex than others and need the removal of body parts or elements to access the part you want to work on. We want to help you in this task. That’s why on this web page we are going to find out how to remove the bumper from a Ford C-max 2. This process is not very complex and you should be able to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Ford C-max 2, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford C-max 2
So let’s start our content page with the front bumper of your Ford C-max 2. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to to be able to disassemble the bumper of your Ford C-max 2 in good conditions:
- If you want to be more comfortable, we recommend you to lift your Ford C-max 2 and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your automobile: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also known as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Ford C-max 2. According to your vehicle features and the year of your model, you will also be able to find staples, to get this done, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Ford C-max 2 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Ford C-max 2 to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Be sure you unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford C-max 2, to reassemble it adhere to the steps in the opposite direction.
How to remove the rear bumper from a Ford C-max 2
And to conclude, whether or not the process is quite equivalent, we will take a look at the case of removing the rear bumper from your Ford C-max 2. For each step to avoid repeating ourselves we will only give you the broad highlights, read the part 1 if you have any doubts or questions for more info.
- Start by carrying out the same first step, that is, lift your Ford C-max 2 and take out your rear wheels to be able to have an optimal working space to remove the bumper of your Ford C-max 2 serenely
- Remove the rear wheel arches of your Ford C-max 2 to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it more convenient to remove the bumper from your Ford C-max 2.
- Remove the lower bindings underneath your Ford C-max 2.
- Simultaneously, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford C-max 2, adhere to the same procedure as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Ford C-max 2 whether it is the front one or the rear one the techniques are essentially the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Ford C-max 2, take a look at the Ford C-max 2 category.
