If you’re a bit of a handy person, you’re almost certainly willing to manage the majority of the work to be achieved on your Dodge Ram, but some are more difficult than others and require the removal of body parts or elements to access the part you want to focus on. We would really like to help you in this process. That’s why today we are going to discover how to remove the bumper from a Dodge Ram. This task is not very difficult and you should be able to do it with few tools. To accomplish this, first we will see how to remove the front bumper of your Dodge Ram, then how to remove the rear bumper of this one.
How to remove the front bumper from a Dodge Ram
So let’s begin our article content with the front bumper of your Dodge Ram. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to in order to disassemble the bumper of your Dodge Ram in good conditions:
- If you want to be more comfy, we recommend you to put your Dodge Ram on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Dodge Ram. Depending on your automobile features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Dodge Ram on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go underneath your Dodge Ram to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Dodge Ram, to put it back in place stick to the steps in the opposite way.
How to remove the rear bumper from a Dodge Ram
And now, even if the operation is quite identical, we will take a look at the case of removing the rear bumper from your Dodge Ram. For each step to avoid repeating ourselves we will just give you the broad outlines, read the part 1 if you have any uncertainties or questions for more info.
- Start by undertaking the same first step, that is, lift your Dodge Ram and take out your rear wheels in order to have an optimal working area to remove the bumper of your Dodge Ram serenely
- Remove the rear wheel arches of your Dodge Ram to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it much easier to remove the bumper from your Dodge Ram.
- Take off the lower bindings below your Dodge Ram.
- While doing so, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Dodge Ram, stick to the same procedure as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Dodge Ram whether it is the front one or the rear one the ways are essentially the same and it is enough to be careful to make everything go well.
To get more tips on the Dodge Ram, take a look at the Dodge Ram category.
