If you’re a bit of a do-it-yourselfer, you’re most certainly wanting to look after almost all of the service to be completed on your Chevrolet Impala, but some are more difficult than others and need the removal of body parts or parts to access the part you want to work on. We would really like to help you in this process. That’s why on this web page we are going to find out how to remove the bumper from a Chevrolet Impala. This procedure is not very difficult and you should be able to do it with few equipment. For that, first we will see how to remove the front bumper of your Chevrolet Impala, then how to remove the rear bumper of this one.
How to remove the front bumper from a Chevrolet Impala
So let’s begin our document with the front bumper of your Chevrolet Impala. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to follow to be able to disassemble the bumper of your Chevrolet Impala in good conditions:
- If you want to be more comfy, we advise you to lift your Chevrolet Impala and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your car: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Chevrolet Impala. Dependant on your motor vehicle features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Chevrolet Impala on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your Chevrolet Impala to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Chevrolet Impala, to reassemble it follow the steps in the opposite direction.
How to remove the rear bumper from a Chevrolet Impala
And to conclude, even if the procedure is quite equivalent, we will check out the case of removing the rear bumper from your Chevrolet Impala. For each stage to avoid repeating ourselves we will simply give you the broad highlights, read the part 1 if you have any concerns or questions for more details.
- Start by carrying out the same first stage, that is, lift your Chevrolet Impala and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Chevrolet Impala without trouble
- Remove the rear wheel arches of your Chevrolet Impala to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it less complicated to remove the bumper from your Chevrolet Impala.
- Remove the lower bindings below your Chevrolet Impala.
- At the same time, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Chevrolet Impala, follow the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Chevrolet Impala whether it is the front one or the rear one the ways are almost the same and it is enough to be meticulous to make everything go well.
If you want more tutorials on the Chevrolet Impala, go to our Chevrolet Impala category.
