Wanting to handle the small repairs to be made to your motor vehicle is starting to be a lot more basic. In fact, the annual budget invested in a car is considerable, so seeking to service it on your own seems a wise solution. It doesn’t matter if it’s to access your fuel pump, change your seat, wash a stain, or extraordinarily transport bulky stuff, some of you are wondering how to remove the back seat on Volkswagen Beetle. We will try on this page to present you the different ways depending on the year and series of your Volkswagen Beetle.
How to remove the back seat on Volkswagen Beetle with bolt system
Let’s begin with the first scenario. If you are interested in a technique to remove the rear seat of your Volkswagen Beetle which is fixed only by 4 bolts, the process is almost certainly the simplest. In fact, to achieve this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are located under the seat at the level of the passenger footwell. This will let you to totally remove it from its fasteners and take it out.
How to remove the back seat Volkswagen Beetle with clip system
Solution now a little more difficult because we tend to be skeptical of ties that are fixed in force, always scared to pull too hard and destroy one. How do I remove the back seat of my Volkswagen Beetle that has a clip system? In general these clips will be located under the seat, you will see them when you lift the seat of the bench. These clips are often consisting of a plastic portion and a metal iron that clips in it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this approach doesn’t work, in general pulling will be enough to release them.
How to remove the rear seat Volkswagen Beetle with folding system with bolts only at the front
Finally, the last process to take off the rear seat of your Volkswagen Beetle, some years have a folding seat that is not fixed on the rear part, in such a case, it is the simplest option you can have to achieve. You will just need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Volkswagen Beetle.
That’s it, now you should have all the details you need to remove the rear seat of your car without problem. If you are planning to dismantle other parts like the bumper of your Volkswagen Beetle, we have also write some guides to help you in these missions.
To find more tips on the Volkswagen Beetle, take a look at the Volkswagen Beetle category.
