Recent cars all come with an astounding quantity of technology, but, resulting from your budget or the year of your Volkswagen Golf, you may not be lucky enough to have them all. In this article we’re going to help you correct this trouble by telling you how to install parking sensor on my Volkswagen Golf? In fact, this option is extremely useful, particularly if you live in the city and have to park often in narrow parking places. To help you out, we’ll first examine how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Volkswagen Golf, and at last, how much does a parking sensor cost?

install-parking-sensors-volkswagen-golf

How does parking sensors operate on an Volkswagen Golf?

So we start with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Volkswagen Golf and an obstacle when you maneuver. It is as a result specifically logical for people who have to maneuver frequently, whose visibility is awful, or whose car size is large.
Often installed as standard, the reverse sensors of a Volkswagen Golf incorporate a set of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in level with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Volkswagen Golf will help you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Volkswagen Golf?

We now advance to the part that you are almost certainly most interested in, installing reverse parking sensors on a Volkswagen Golf. This section is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen Golf.

How to replace a defective backup sensors on a Volkswagen Golf

First we’ll see how to replace a defective parking sensor on an Volkswagen Golf. In cases where your Volkswagen Golf has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function correctly. Luckily for you this process is extremely simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the broken parking sensor from your Volkswagen Golf, this step is extremely intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Volkswagen Golf

    Now we move on to the section you’re most likely most interested in, how to install a reverse sensor set up on a Volkswagen Golf that doesn’t have one? As we mentioned earlier on, you’re lucky because a good number of OEMs now offer aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will definitely have to remove the bumper of your Volkswagen Golf for the installation, do not be reluctant to read our document on this subject matter to discover the method to follow. If you don’t feel like it, you can call a professional, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to stick to the installation guidelines, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Think about the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Volkswagen Golf

      And at last, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Golf. There are two options, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation manual which is accessible with some electrical bases.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Volkswagen Golf?

        Price of replacing a defective reversing parking sensor for an Volkswagen Golf

        The replacement of a damaged reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Volkswagen Golf

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality package.

        Price of a parking sensors kit without drilling for a Volkswagen Golf

        .
        To conclude, for the price of a reversing radar without drilling for your Volkswagen Golf, what ever type you select, you will have to spend among 30 and 60 euros.

        In the event that you have any additional questions about the Volkswagen Golf, do not hesitate to consult our Volkswagen Golf category.