Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Volkswagen Golf is one of the great classics. Nevertheless this act is basic to execute, some of you are most probably wondering why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Volkswagen Golf? We will now answer these questions.


Benefit to always have the brake fluid level up in your Volkswagen Golf

So we commence our article content with the significance of checking the brake fluid level on a Volkswagen Golf. This fluid has a major role on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is consequently necessary to check the brake fluid level of your Volkswagen Golf regularly (every 10,000km for example). It is also wise to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This procedure is particularly simple and does not require amazing knowledge of mechanics, so it is easy for all Volkswagen Golf owners to do it themselves. If the Brake light on the dashboard of your Volkswagen Golf does not match to a lack of brake fluid, do not be reluctant to seek advice from our article content for details. Nevertheless, there are some measures and rules to follow that we will notice in the next section of this article content.

How to fill up the brake fluid of a Volkswagen Golf

So now we will explain to you how to do the brake fluid level on a Volkswagen Golf. Please be aware that this is very basic to do. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will get this info in the user manual of your Volkswagen Golf. Now here are the steps to adhere to to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
  • Once identified, browse the instructions on the cap carefully so as not to make any problems within the the procedure, we advise you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Volkswagen Golf up to the mark “Max”.
  • If the level was under the “Min” mark before you checked the brake fluid level in your Volkswagen Golf, be sure to check the level in a few days/weeks to make sure you don’t have a leak in the brake system

That’s it, you now have all the information you need to safely fill the brake fluid level of your Volkswagen Golf.

If you have any further questions about the Volkswagen Golf, do not hesitate to consult our Volkswagen Golf category.