Recent cars all come with an astounding amount of technology, however, by reason of your budget or the year of your Fiat 500, you may not be sufficiently lucky to have them all. Today we’re going to help you correct this concern by detailing how to install parking sensor on my Fiat 500? In fact, this option is highly handy, particularly if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first view how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Fiat 500, and to finish, how much does a parking sensor cost?
How does parking sensors function on an Fiat 500?
So we commence with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option allows you to know the distance between the back of your Fiat 500 and an obstacle when you move back. It is consequently especially honest for drivers who have to maneuver regularly, whose visibility is poor, or whose vehicle size is huge.
In many cases installed as standard, the reverse sensors of a Fiat 500 consist of a set of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. Generally you will have a sound indicator in the cabin which will enhance in intensity with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Fiat 500 will enable you for parking, but also for security and staying away from pedestrians.
How to install parking sensors on a Fiat 500?
We now go forward to the part that you are quite likely most focused on, installing reverse parking sensors on a Fiat 500. This section is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Fiat 500.
How to replace a faulty backup sensors on a Fiat 500
First we’ll see how to replace a faulty parking sensor on an Fiat 500. If it turns out your Fiat 500 has suffered a rear shock and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function properly. Fortunately for you this operation is really simple, you can even carry it out yourself without any specified mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take off the broken parking sensor from your Fiat 500, this step is fairly intuitive, it is simply clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working properly.
- You will only need to stick to the installation instructions, but we summarize here the main steps.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Give it a try all out.
- Adhere to the installation owners manual which is accessible with some electrical bases.
- Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Fiat 500
Now we move on to the section you’re quite likely most focused on, how to install a reverse sensor set up on a Fiat 500 that doesn’t have one? As we revealed earlier on, you’re lucky because many of OEMs now deal automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these types in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will certainly have to remove the bumper of your Fiat 500 for the set up, do not hesitate to consult our document on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a workshop, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Fiat 500
And to finish, we will now present you the installation of a drill-free parking sensors system on a Fiat 500. There are two options, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Fiat 500?
Price of replacing a faulty reversing parking sensor for an Fiat 500
The replacement of a broken reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a workshop.
Price of an ultrasonic parking sensors with drilling for Fiat 500
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable package.
Price of a parking sensors kit without drilling for a Fiat 500
.
To finish, for the price of a reversing radar without drilling for your Fiat 500, what ever type you choose, you will have to pay among 30 and 60 euros.
To find more tips on the Fiat 500, take a look at the Fiat 500 category.
