Driving is a daily activity for a lot of people, our roads are not all the time safe, and regardless it’s raining, windy or snowing, we quite often have no choice but to take our Fiat 500. Not having the capability to act on traffic conditions, we try to have at least a safe car! If you are not confident, if you have the feeling that your Fiat 500 is pulling to the left, then you are in the good. Our team decided to write this content page to help you locate the source of this issue and quickly feel safe behind the wheel of your car. To achieve this, we will first take a look at the causes of a Fiat 500 that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.

pull-leftfiat-500

Fiat 500 that pulls to the left without vibration

Fiat 500 pulling to the left because of the alignment

Let’s begin with the circumstance of your Fiat 500 which pulls to the left without vibration, one of the most basic roots of a non-straight trajectory on a car is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is normally completed when you change your tires. Nevertheless it is tricky or even impossible to know the condition of your alignment, you can check out the sidewalls of your tires, if you see abnormal wear on your Fiat 500, it is likely that the alignment is at fault. In cases like this, go to your service garage or tyre expert to resolve it.

Fiat 500 pulling to the left because of the tyres

Speaking of tires, parallelism isn’t the only explanation for a car that pulls to the left. In reality, if you have a difference in pressure on your tires, it is logical that your Fiat 500 is no longer a stable steering. So remember to check the pressure of all four tyres. Additionally to the risk of an ıncident if you encounter your Fiat 500 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to change them faster.

My Fiat 500 is pulling to the left and I encounter vibrations:

Fiat 500 pulling to the left because of the silent blocks

Now let’s look at the case of a Fiat 500 that pulls to the left but also causes vibrations in the steering wheel. The first common cause of trajectory error plus vibration is that your silent blocks are dead. In reality, when they are too worn, they will no longer assume their role of shock absorber and binder between the different auto parts of your front drivetrain, which ends up in a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Fiat 500 pulls to the left. Verify their condition and change them if required. In the event that you really want more info on concerns with the silent blocks, please examine our specific content page.

My Fiat 500 pulls to the left because of the bearings

Another possibility that your Fiat 500 pulls to the left is that one of your bearings, usually the front one, is dead, you should, furthermore to the trajectory deficiency, experience a particular vibration or rolling noise. In reality, when bearings are damaged, they no more rotate as well and slow down the rotation of the wheel on which they are installed, which automatically ends up in a trajectory deficiency. Verify their condition and have them changed if needed.

My Fiat 500 pulls to the left because of the shock absorbers

Last but not least, your Fiat 500 that pulls to the left and creates vibrations because of the shock absorbers. Regardless it’s the damper cup, your tired springs, or a twisted cylinder, every deficiency in connection with the shock absorbers can disturb the normal behaviour of the Fiat 500. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers inspected and ask your auto technician for a replacement if needed.

To get more tips on the Fiat 500, take a look at the Fiat 500 category.