Modern cars all come with an impressive number of options, nevertheless, because of your budget or the year of your Lincoln Navigator, you may not be sufficiently lucky to have them all. In this article we’re gonna help you correct this trouble by explaining how to install parking sensor on my Lincoln Navigator? In reality, this option is extremely practical, especially if you live in the city and have to park your car habitually in narrow parking places. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Lincoln Navigator, and to finish, how much does a parking sensor cost?
How does parking sensors function on an Lincoln Navigator?
So we begin with the functioning of a parking sensor. As we told you in the intro, this particularl interesting option allows you to know the distance between the back of your Lincoln Navigator and an obstacle when you move back. It is therefore mainly honest for owners who have to maneuver regularly, whose field of vision is poor, or whose car size is large.
Often fitted as standard, the reverse sensors of a Lincoln Navigator consist of a set of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound warning in the cabin which will enhance in strength with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Lincoln Navigator will enable you for parking, but also for security and staying away from pedestrians.
How to install parking sensors on a Lincoln Navigator?
We now proceed to the section that you are quite likely most intrigued by, installing reverse parking sensors on a Lincoln Navigator. This section is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Lincoln Navigator.
How to replace a broken backup sensors on a Lincoln Navigator
First we’ll see how to replace a broken parking sensor on an Lincoln Navigator. In cases where your Lincoln Navigator has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function effectively. Thankfully for you this procedure is extremely simple, you can even make it out yourself without any specified mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take off the destroyed parking sensor from your Lincoln Navigator, this stage is very intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating effectively.
- You will just need to stick to the installation instructions, but we summarize here the main procedures.
- Take off the bumper if you don’t have access to the inside of it.
- Think about the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it all out.
- Stick to the installation guidebook which is accessible with some electrical knowledges.
- Determine the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Lincoln Navigator
Now we proceed to the section you’re quite likely most intrigued by, how to install a reverse sensor set up on a Lincoln Navigator that doesn’t have one? As we mentioned earlier, you’re lucky because a good number of OEMs now offer aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Lincoln Navigator for the set up, do not hesitate to consult our document on this subject matter to learn the process to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Lincoln Navigator
And to finish, we will now present you the installation of a drill-free parking sensors system on a Lincoln Navigator. There are two types, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Lincoln Navigator?
Price of changing a broken reversing parking sensor for an Lincoln Navigator
The replacement of a damaged reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Lincoln Navigator
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable kit.
Price of a parking sensors kit without drilling for a Lincoln Navigator
.
To finish, for the price of a reversing radar without drilling for your Lincoln Navigator, whatever version you choose, you will have to spend between 30 and 60 euros.
In the event that you have any additional questions about the Lincoln Navigator, do not hesitate to consult our Lincoln Navigator category.
