You’re tired of listening to cassettes and only having the ability to enjoy the radio, while your smart phone is full of your preferred music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve created this content page to help you, because in this article you’re going to find out how to install a car radio on your Volkswagen T-Cross. To achieve this, first we will see how to remove the old car radio, then how to install a car radio on Volkswagen T-Cross and finally, how to connect it.
How to install car radio on Volkswagen T-Cross: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Volkswagen T-Cross, there is one important task, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions based on the stereo that equips your Volkswagen T-Cross:
- Original car radio:
In this case, you’ll have to be persistent, generally speaking, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Volkswagen T-Cross. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen T-Cross: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Volkswagen T-Cross. Before you start, take some time to check the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the role of holding your car radio in place on your Volkswagen T-Cross, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen T-Cross, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen T-Cross, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Volkswagen T-Cross, take a look at the Volkswagen T-Cross category.
