You’re uninterested in listening to cassettes and only having the capacity to listent to the radio, while your phone is loaded with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve created this content to help you, because now you’re going to find out how to install a car radio on your Toyota Hilux. To get this done, first we will see how to remove the old car radio, then how to install a car radio on Toyota Hilux and to finish, how to connect it.
How to install car radio on Toyota Hilux: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Toyota Hilux, there is one important task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options based on the stereo that equips your Toyota Hilux:
- Original car radio:
In this instance, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Toyota Hilux. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Hilux: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Toyota Hilux. Beforehand, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Toyota Hilux, once placed, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Hilux, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Hilux, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you have any additional questions about the Toyota Hilux, do not hesitate to consult our Toyota Hilux category.
