You’re tired of listening to cassettes and only being able to enjoy the radio, while your smartphone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s specifically why we’ve created this content to help you, because in this article you’re going to find out how to install a car radio on your volvo v90. To make this happen, first we will discover how to remove the old car radio, then how to install a car radio on volvo v90 and to finish, how to connect it.
How to install car radio on volvo v90: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your volvo v90, there is one fundamental step, take out the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two options based on the stereo that equips your volvo v90:
- Original car radio:
In this case, you’ll have to be persistent, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your volvo v90. In reality, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your volvo v90: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your volvo v90. Before you start, take some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines required in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your volvo v90, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your volvo v90, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on volvo v90, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To find more tips on the volvo v90, take a look at the volvo v90 category.
