You’re uninterested in listening to cassettes and only having the capability to listent to the radio, while your smart phone is loaded with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s precisely why we’ve posted this article content to help you, because in this article you’re going to learn about how to install a car radio on your Volkswagen Fox. To achieve this, initially we will discover how to remove the old car radio, then how to install a car radio on Volkswagen Fox and at last, how to connect it.
How to install car radio on Volkswagen Fox: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volkswagen Fox, there is one important task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two ways dependent on the stereo that equips your Volkswagen Fox:
- Original car radio:
In cases like this, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Volkswagen Fox. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Fox: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Volkswagen Fox. Ahead of time, take the time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Volkswagen Fox, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Fox, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Volkswagen Fox, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you wish more guides on the Volkswagen Fox, go to our Volkswagen Fox category.
