You’re sick and tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is full of your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve created this content page to help you, because right now you’re going to learn about how to install a car radio on your Toyota Aygo. To accomplish this, first of all we will discover how to remove the old car radio, then how to install a car radio on Toyota Aygo and at last, how to connect it.

install-car-radio-toyota-aygo

How to install car radio on Toyota Aygo: Removing the old car stereo

Before we get down to the serious business of how to install a car stereo on your Toyota Aygo, there is one necessary task, take off the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two methods dependant upon the stereo that equips your Toyota Aygo:

  • Original car radio:
    In cases like this, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Toyota Aygo. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
  • Aftermarket radio :
    In this scenario the technique is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!

How to install car radio on your Toyota Aygo: Fitting and connecting the car radio

Let’s go to the most important part for you, how to install a car stereo on your Toyota Aygo. Ahead of time, spend some time to examine the compatibility of your car and your headunit, and to read the installation information, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Toyota Aygo, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Aygo, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Aygo, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.

To get more tips on the Toyota Aygo, take a look at the Toyota Aygo category.