Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Volkswagen Fox is one of the most classics. Although this process is simple to carry out, some of you are most likely wondering why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Volkswagen Fox? We will now answer these questions.
Benefit to always have the brake fluid level up in your Volkswagen Fox
So we start our article content with the benefit of verifying the brake fluid level on a Volkswagen Fox. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is therefore fundamental to check the brake fluid level of your Volkswagen Fox often (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid will lose its attributes. This procedure is extremely simple and does not require evolved experience of mechanics, so it is easy for all Volkswagen Fox owners to do it themselves. If the Brake light on the dashboard of your Volkswagen Fox does not correspond to a lack of brake fluid, do not be reluctant to consult our article content for details. Nevertheless, there are some safety measures and rules to respect that we will check out in the up coming part of this article content.
How to fill up the brake fluid of a Volkswagen Fox
So now we will learn to you how to do the brake fluid level on a Volkswagen Fox. Please notice that this is very elementary to carry out. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this data in the user manual of your Volkswagen Fox. Now here are the steps to follow to make your level:
- Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is placed over the master cylinder (metal part) and has a yellow cap.
- Once identified, browse the instructions on the cap attentively so as not to make any mistakes during the procedure, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Volkswagen Fox up to the mark “Max”.
- If the level was below the “Min” mark before you inspected the brake fluid level in your Volkswagen Fox, make sure you check the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to safely and securely fill the brake fluid level of your Volkswagen Fox.
To get more tips on the Volkswagen Fox, take a look at the Volkswagen Fox category.
