You’re bored with listening to cassettes and only having the ability to enjoy the radio, while your smart phone is filled with your preferred tracks but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve written and published this article content to help you, because now you’re going to find out how to install a car radio on your Skoda Kamiq. To make this happen, initially we will see how to remove the old car radio, then how to install a car radio on Skoda Kamiq and to finish, how to connect it.
How to install car radio on Skoda Kamiq: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Skoda Kamiq, there is one important step, take away the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two techniques determined by the stereo that equips your Skoda Kamiq:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Skoda Kamiq. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the operation is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Skoda Kamiq: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Skoda Kamiq. Before you start, spend some time to check the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Skoda Kamiq, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Skoda Kamiq, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Skoda Kamiq, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
In the event that you have any additional questions about the Skoda Kamiq, do not hesitate to consult our Skoda Kamiq category.
