You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is filled with your preferred music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s exactly why we’ve made this content to help you, because right now you’re going to learn about how to install a car radio on your Toyota Hilux 3. To get this done, first of all we will see how to remove the old car radio, then how to install a car radio on Toyota Hilux 3 and to finish, how to connect it.
How to install car radio on Toyota Hilux 3: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Toyota Hilux 3, there is one imperative task, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two methods dependent on the stereo that equips your Toyota Hilux 3:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Toyota Hilux 3. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Hilux 3: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Toyota Hilux 3. Before you start, spend some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Toyota Hilux 3, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Hilux 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Toyota Hilux 3, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To discover more tips on the Toyota Hilux 3, take a look at the Toyota Hilux 3 category.
