You’re sick and tired of listening to cassettes and only having the capability to listent to the radio, while your phone is filled with your favourite music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve written and published this article content to help you, because now you’re going to learn about how to install a car radio on your Renault Grand Scenic 4. To do this, first of all we will discover how to remove the old car radio, then how to install a car radio on Renault Grand Scenic 4 and at last, how to connect it.
How to install car radio on Renault Grand Scenic 4: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Renault Grand Scenic 4, there is one fundamental step, take away the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two solutions dependent on the stereo that equips your Renault Grand Scenic 4:
- Original car radio:
In cases like this, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Renault Grand Scenic 4. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Grand Scenic 4: Fitting and connecting the car radio
Let’s go to the most important part for you, how to install a car stereo on your Renault Grand Scenic 4. Ahead of time, take some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Renault Grand Scenic 4, once installed, don’t forget to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Grand Scenic 4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Renault Grand Scenic 4, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
In the event that you have any further questions about the Renault Grand Scenic 4, do not hesitate to consult our Renault Grand Scenic 4 category.
