You’re tired of listening to cassettes and only having the capacity to listent to the radio, while your phone is loaded with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s specifically why we’ve posted this article to help you, because in this article you’re going to find out how to install a car radio on your Renault Megane. To make this happen, first we will discover how to remove the old car radio, then how to install a car radio on Renault Megane and at last, how to connect it.
How to install car radio on Renault Megane: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Renault Megane, there is one essential task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is carried out, here are the two options dependant upon the stereo that equips your Renault Megane:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Renault Megane. In fact, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the process is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Megane: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Renault Megane. Beforehand, spend some time to check the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the function of holding your car radio in place on your Renault Megane, once situated, remember to press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Megane, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Renault Megane, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any additional questions about the Renault Megane, do not hesitate to consult our Renault Megane category.
