You’re bored with listening to cassettes and only having the capacity to enjoy the radio, while your smartphone is loaded with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve posted this article content to help you, because now you’re going to learn about how to install a car radio on your Honda Insight. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Honda Insight and at last, how to connect it.
How to install car radio on Honda Insight: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Honda Insight, there is one imperative task, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two methods dependant upon the stereo that equips your Honda Insight:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Honda Insight. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this situation the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Honda Insight: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Honda Insight. Ahead of time, take the time to examine the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Honda Insight, once positioned, make sure to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Honda Insight, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Honda Insight, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If you wish more guides on the Honda Insight, go to our Honda Insight category.
