You’re bored with listening to cassettes and only having the capacity to listent to the radio, while your smart phone is filled with your preferred music but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car journeys to the fullest… That’s precisely why we’ve created this article to help you, because in this article you’re going to find out how to install a car radio on your Chevrolet Colorado. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on Chevrolet Colorado and at last, how to connect it.
How to install car radio on Chevrolet Colorado: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Chevrolet Colorado, there is one important task, take out the audio set you already have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods according to the stereo that equips your Chevrolet Colorado:
- Original car radio:
In cases like this, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this process will not be enough to remove the old car radio from your Chevrolet Colorado. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the operation is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve finished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Colorado: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Chevrolet Colorado. Before you start, take the time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Chevrolet Colorado, once positioned, be sure you press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Colorado, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Chevrolet Colorado, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If you want more tutorials on the Chevrolet Colorado, go to our Chevrolet Colorado category.
