You’re tired of listening to cassettes and only being able to listent to the radio, while your phone is full of your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written this article content to help you, because now you’re going to find out how to install a car radio on your Mercedes Benz GL Class. To get this done, first we will see how to remove the old car radio, then how to install a car radio on Mercedes Benz GL Class and at last, how to connect it.
How to install car radio on Mercedes Benz GL Class: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Mercedes Benz GL Class, there is one essential step, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two techniques dependent on the stereo that equips your Mercedes Benz GL Class:
- Original car radio:
In this instance, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Mercedes Benz GL Class. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Mercedes Benz GL Class: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Mercedes Benz GL Class. Ahead of time, spend some time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Mercedes Benz GL Class, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Mercedes Benz GL Class, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Mercedes Benz GL Class, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
If you want more tutorials on the Mercedes Benz GL Class, go to our Mercedes Benz GL Class category.
