You’re bored with listening to cassettes and only being able to listent to the radio, while your phone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve made this article to help you, because in this article you’re going to learn about how to install a car radio on your Chevrolet Avalanche. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Chevrolet Avalanche and to finish, how to connect it.
How to install car radio on Chevrolet Avalanche: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Chevrolet Avalanche, there is one fundamental step, take off the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is completed, here are the two ways based on the stereo that equips your Chevrolet Avalanche:
- Original car radio:
In this instance, you’ll have to be persistent, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Chevrolet Avalanche. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Avalanche: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Chevrolet Avalanche. Beforehand, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Chevrolet Avalanche, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Avalanche, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Chevrolet Avalanche, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any additional questions about the Chevrolet Avalanche, do not hesitate to consult our Chevrolet Avalanche category.
