Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Nissan Cube is one of the great classics. Although this action is basic to execute, some of you are most likely questioning why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Nissan Cube? We will now answer these questions.

check-brake-fluid-level-nissan-cube

Advantage to always have the brake fluid level up in your Nissan Cube

So we commence our guideline with the benefit of looking at the brake fluid level on a Nissan Cube. This fluid has a vital function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that as time passes you may lose brake fluid without any particular leak (without any leakage). It is therefore imperative to check the brake fluid level of your Nissan Cube often (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid will lose its attributes. This procedure is really simple and does not require amazing knowledge of mechanics, so it is easy for all Nissan Cube owners to do it themselves. If the Brake light on the dashboard of your Nissan Cube does not match to a lack of brake fluid, do not think twice to read our guideline for details. Nevertheless, there are some safety measures and rules to follow that we will check out in the up coming part of this guideline.

How to fill up the brake fluid of a Nissan Cube

So now we will describe to you how to do the brake fluid level on a Nissan Cube. Please note that this is very simple to do. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Nissan Cube. Now here are the steps to stick to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to find, it is usually made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, browse the instructions on the cap attentively so as not to make any problems during the procedure, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Nissan Cube up to the mark “Max”.
  • If the level was below the “Min” mark before you inspected the brake fluid level in your Nissan Cube, make sure you check the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to properly fill the brake fluid level of your Nissan Cube.

To discover more tips on the Nissan Cube, take a look at the Nissan Cube category.