Among the small service acts that you should do regularly on your car, to fill up the brake fluid level of your Chevrolet Colorado is one of the great classics. Even though this act is very easy to carry out, some of you are almost certainly wondering why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Chevrolet Colorado? We will now answer these questions.


Advantage to always have the brake fluid level up in your Chevrolet Colorado

So we begin our content page with the interest of looking at the brake fluid level on a Chevrolet Colorado. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result necessary to verify the brake fluid level of your Chevrolet Colorado often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because with time the brake fluid will lose its attributes. This procedure is extremely simple and does not require advanced expertise of mechanics, so it is easy for all Chevrolet Colorado owners to do it on their own. If the Brake light on the dashboard of your Chevrolet Colorado does not correspond to a lack of brake fluid, do not be reluctant to consult our content page for details. On the other hand, there are some safety measures and rules to respect that we will notice in the next section of this content page.

How to fill up the brake fluid of a Chevrolet Colorado

So now we will explain to you how to do the brake fluid level on a Chevrolet Colorado. Please note that this is very basic to perform. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this info in the user manual of your Chevrolet Colorado. Now here are the steps to follow to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is located above the master cylinder (metal part) and has a yellow cap.
  • Once found, examine the instructions on the cap carefully so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Chevrolet Colorado up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Chevrolet Colorado, remember to verify the level in a few days/weeks to make certain you don’t have a leak in the brake system

That’s it, you now have all the info you need to properly fill the brake fluid level of your Chevrolet Colorado.

To discover more tips on the Chevrolet Colorado, take a look at the Chevrolet Colorado category.