Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Ford Puma is one of the most classics. Nevertheless this process is very easy to perform, some of you are likely wondering why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Ford Puma? We will now answer these questions.
Benefit to always have the brake fluid level up in your Ford Puma
So we begin our content with the significance of looking at the brake fluid level on a Ford Puma. This fluid has a fundamental task on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is as a result necessary to examine the brake fluid level of your Ford Puma on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid will lose its features. This process is particularly simple and does not require evolved knowledge of mechanics, so it is easy for all Ford Puma owners to do it on their own. If the Brake light on the dashboard of your Ford Puma does not correspond to a lack of brake fluid, do not hesitate to seek advice from our content for details. On the other hand, there are some safety measures and rules to follow that we will check out in the following part of this content.
How to fill up the brake fluid of a Ford Puma
So now we will explain to you how to do the brake fluid level on a Ford Puma. Please be aware that this is very basic to carry out. On the other hand, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this data in the user manual of your Ford Puma. Now here are the steps to stick to to make your level:
- Open your cover and find your brake fluid reservoir, it is very easy to locate, it is in general made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once established, browse the instructions on the cap attentively so as not to make any problems during the process, we encourage you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ford Puma up to the mark “Max”.
- If the level was beneath the “Min” mark before you examined the brake fluid level in your Ford Puma, be sure to examine the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Ford Puma.
To get more tips on the Ford Puma, take a look at the Ford Puma category.
