Today we’re going to tackle one more matter in the series on car care. This is the coolant level, and more specifically where to put coolant in Ford Puma? For this, we will commence this content with a little reminder on the benefit of making sure of the coolant level of your car, then, where to fill coolant in Ford Puma? And, at last, how to make the level of this famous liquid.

put-coolant-ford-puma

Why to fill coolant level on a Ford Puma?

Before we show you where the coolant is on a Ford Puma, we commence our content by reminding you what is the benefit of ensuring an ideal coolant level ? The coolant of a Ford Puma has a vital action in the good functioning of your engine, in truth, it will circulate in it to catch the heat made by its operation and transfer it to your radiator which has the mission to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not efficient. Without coolant your engine would overheat after just a few minutes, and this would end result in engine failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops down below the minimum level, the circulation of the coolant in the cooling system might be impaired and consequently its effectiveness might be limited or even zero if it is too low. Finally, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Ford Puma?

We now move on to the step that you are most likely most interested in, where to put coolant in Ford Puma? You are now conscious of the importance of constantly having the ideal level of this coolant. To locate it is very basic, here are the different steps to allow you to discover the expansion tank that contains the coolant of your Ford Puma:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly locate the expansion tank that contains the coolant of your Ford Puma, it is usually found in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Ford Puma?

Now that you have identify where the coolant is in your Ford Puma , we will show you how to make the level of it. Nothing could be less complicated, just adhere to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just cured water with antifreeze added.
  • Verify on the side of the expansion tank of your Ford Puma the level of the expansion tank. Just see if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, otherwise the level of your liquid is enough
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Ford Puma by checking repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t begin your engine, and with a syringe, remove the excess coolant.

If the engine of your Ford Puma warms up despite a level coolant, read this content, you will have the ability to find the causes of this issue.

To discover more tips on the Ford Puma, take a look at the Ford Puma category.