Among the small routine service acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Ds Ds 3 is one of the most classics. Nevertheless this process is very easy to accomplish, some of you are probably concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Ds Ds 3? We will now answer these questions.

check-brake-fluid-level-ds-ds-3

Benefit to always have the brake fluid level up in your Ds Ds 3

So we begin our content with the benefit of looking at the brake fluid level on a Ds Ds 3. This fluid has a major role on your car, transmit the braking power to the wheels and thus stop your car. However, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is consequently imperative to check the brake fluid level of your Ds Ds 3 on a regular basis (every 10,000km for example). It is also beneficial to flush the system every 50,000km because over time the brake fluid loses its attributes. This operation is extremely simple and does not require advanced experience of mechanics, so it is easy for all Ds Ds 3 owners to do it themselves. If the Brake light on the dashboard of your Ds Ds 3 does not match to a lack of brake fluid, do not think twice to seek advice from our content for details. However, there are some measures and rules to follow that we will check out in the up coming section of this content.

How to fill up the brake fluid of a Ds Ds 3

So now we will explain to you how to do the brake fluid level on a Ds Ds 3. Please notice that this is very simple to complete. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this data in the user manual of your Ds Ds 3. Now here are the steps to adhere to to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap cautiously so as not to make any problems within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ds Ds 3 up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Ds Ds 3, make sure to check the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to safely fill the brake fluid level of your Ds Ds 3.

To get more tips on the Ds Ds 3, take a look at the Ds Ds 3 category.