Among the small service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Audi Sq7 is one of the most classics. Nevertheless this act is basic to carry out, some of you are almost certainly wondering why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Audi Sq7? We will now answer these questions.

check-brake-fluid-level-audi-sq7

Benefit to always have the brake fluid level up in your Audi Sq7

So we start our content page with the significance of checking the brake fluid level on a Audi Sq7. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that in the long run you may lose brake fluid in the normal way (without any leakage). It is consequently essential to verify the brake fluid level of your Audi Sq7 on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because over time the brake fluid loses its attributes. This process is particularly simple and does not require amazing experience of mechanics, so it is easy for all Audi Sq7 owners to do it on their own. If the Brake light on the dashboard of your Audi Sq7 does not correspond to a lack of brake fluid, do not hesitate to read our content page for details. Nevertheless, there are some measures and rules to follow that we will notice in the up coming section of this content page.

How to fill up the brake fluid of a Audi Sq7

So now we will show to you how to do the brake fluid level on a Audi Sq7. Please notice that this is very elementary to accomplish. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will get this data in the user manual of your Audi Sq7. Now here are the steps to stick to to make your level:

  • Open your cover and locate your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
  • Once found, read the instructions on the cap mindfully so as not to make any mistakes during the process, we encourage you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is adequate do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Audi Sq7 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Audi Sq7, remember to verify the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Audi Sq7.

To find more tips on the Audi Sq7, take a look at the Audi Sq7 category.