Among the small maintenance works that you should do regularly on your car, to fill up the brake fluid level of your Ds Ds 4 is one of the great classics. Although this work is very easy to carry out, some of you are most likely wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Ds Ds 4? We will now answer these questions.

check-brake-fluid-level-ds-ds-4

Advantage to always have the brake fluid level up in your Ds Ds 4

So we start our guideline with the interest of looking at the brake fluid level on a Ds Ds 4. This fluid has a major task on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that over time you may lose brake fluid in the normal way (without any leakage). It is consequently fundamental to check the brake fluid level of your Ds Ds 4 regularly (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid will lose its characteristics. This operation is specially simple and does not require evolved expertise of mechanics, so it is easy for all Ds Ds 4 owners to do it on their own. If the Brake light on the dashboard of your Ds Ds 4 does not match to a lack of brake fluid, do not think twice to seek advice from our guideline for details. However, there are some precautions and rules to follow that we will see in the next part of this guideline.

How to fill up the brake fluid of a Ds Ds 4

So now we will show to you how to do the brake fluid level on a Ds Ds 4. Please be aware that this is very simple to do. However, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this information in the user manual of your Ds Ds 4. Now here are the steps to follow to make your level:

  • Open your hood and locate your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is based over the master cylinder (metal part) and has a yellow cap.
  • Once discovered, browse the instructions on the cap mindfully so as not to make any problems within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ds Ds 4 up to the mark “Max”.
  • If the level was under the “Min” mark before you examined the brake fluid level in your Ds Ds 4, be sure to check the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to securely fill the brake fluid level of your Ds Ds 4.

Whenever you have any further questions about the Ds Ds 4, do not hesitate to consult our Ds Ds 4 category.