Whether for your own safety, for roadworthiness tests or to prevent a fine, making sure your turn signal bulbs are all the time functional is imperative. Obviously, bulbs are wearing auto parts that will surely burn out after a while and therefore need to be swapped out. You’re most likely on this website because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Jeep Renegade, we’ve made this post to teach you do it all on your own without having to go to your technician. To begin , we will look at the checking a burnt-out rear turn signal bulb on your Jeep Renegade and in a second part, how to replace the rear turn signal bulb on your Jeep Renegade.
How do you know if the rear turn signal bulb on your Jeep Renegade is burnt-out or needs to be replaced?
When you drive your automobile you don’t all the time have the opportunity to check all the safety features of your Jeep Renegade. Obviously, you are often in a hurry and tend to get into your automobile, make your journey and put it down instantly without taking the time to do an occasional check-up. It is due to this fact essential to take the time to once in a while check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Renegade, but you didn’t become aware of it. Here are the two basic solutions to check if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Jeep Renegade, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Jeep Renegade, you will realize that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to replace, like the one of your low beam Jeep Renegade or your position lights on Jeep Renegade, don’t be reluctant to consult our web content to help you to do this replacement.
Changing the rear turn signal bulb on my Jeep Renegade
Now let’s go to the most instersting part of this content page, how to replace the rear turn signal bulb on Jeep Renegade? You should be aware that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Renegade, see our specific content. On the other hand, here are the detailed steps to follow in order to perform this act accurately:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Jeep Renegade. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating properly
.
In the event that you have any additional questions about the Jeep Renegade, do not hesitate to consult our Jeep Renegade category.
