Whether for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are constantly functional is imperative. In fact, bulbs are wearing auto parts that will inevitably burn out in the long run and therefore need to be swapped out. You’re almost certainly on this website because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Chrysler Pacifica, we’ve written and published this post to enable you do it all on your own without having to go to your auto mechanic. In a first step, we will examine the checking a burnt-out rear turn signal bulb on your Chrysler Pacifica and in a second step, how to change the rear turn signal bulb on your Chrysler Pacifica.
How to be sure if the rear turn signal bulb on your Chrysler Pacifica is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the occasion to examine all the security features of your Chrysler Pacifica. In fact, you are generally in a rush and tend to get into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore essential to take some time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chrysler Pacifica, but you didn’t identify it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Chrysler Pacifica, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By paying attention to the sound of your turn signals. Indeed, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Chrysler Pacifica, you will recognize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first approach shown above.
You may have another bulb to change, like the one of your low beam Chrysler Pacifica or your position lights on Chrysler Pacifica, don’t be reluctant to consult our content articles to help you to realize this replacing.
Replacing the rear turn signal bulb on my Chrysler Pacifica
Now let’s go to the most instersting step of this article, how to change the rear turn signal bulb on Chrysler Pacifica? Take note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chrysler Pacifica, see our dedicated guideline. Nevertheless, here are the detailed steps to carry out in order to complete this work properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Chrysler Pacifica. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning in the right way
.
Whenever you have any additional questions about the Chrysler Pacifica, do not hesitate to consult our Chrysler Pacifica category.
