No matter if it’s for your own security, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is critical. Obviously, bulbs are wearing devices that will surely burn out as time passes and therefore need to be swapped out. You’re certainly on this website because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Ram ProMaster, we’ve made this content to help you do it without any help without having to go to your repair shop. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Ram ProMaster and in a second step, how to replace the rear turn signal bulb on your Ram ProMaster.
How do you know if the rear turn signal bulb on your Ram ProMaster is burnt-out or needs to be replaced?
When you drive your automobile you don’t always have the occasion to examine all the security features of your Ram ProMaster. Obviously, you are more often than not in a hurry and tend to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result necessary to take some time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ram ProMaster, but you didn’t become aware of it. Here are the two basic ways to examine if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Ram ProMaster, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are operational.
- By listening to the sound of your turn signals. In truth, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Ram ProMaster, you will detect that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Ram ProMaster or your position lights on Ram ProMaster, don’t hesitate to have a look at our web content to help you to realize this substitution.
Replacing the rear turn signal bulb on my Ram ProMaster
Now let’s go to the most important step of this guideline, how to replace the rear turn signal bulb on Ram ProMaster? Please note that this technique is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ram ProMaster, see our dedicated article content. Nevertheless, here are the detailed steps to stick to in order to perform this act accurately:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Ram ProMaster. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning correctly
.
To find more tips on the Ram ProMaster, take a look at the Ram ProMaster category.
