Whether for your personal safety, for roadworthiness tests or to prevent a fine, ensuring that your turn signal bulbs are constantly functioning is extremely important. In actual fact, bulbs are wearing parts that will surely burn out with time and consequently need to be swapped out. You’re most likely here because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Hyundai Elantra, we’ve put into writing this content to enable you do it on your own without having to go to your motor mechanic. In a first step, we will check out the checking a burnt-out rear turn signal bulb on your Hyundai Elantra and in a second step, how to change the rear turn signal bulb on your Hyundai Elantra.
How to be sure if the rear turn signal bulb on your Hyundai Elantra is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the occasion to examine all the safety features of your Hyundai Elantra. In actual fact, you are quite often on the go and tend to get into your car, make your journey and put it down straight away without taking the time to do an occasional check-up. It is therefore necessary to take the time to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Hyundai Elantra, but you didn’t perceive it. Here are the two simple techniques to examine if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Hyundai Elantra, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are operational.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Hyundai Elantra, you will perceive that the time between each “click” is much shorter, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to change, like the one of your low beam Hyundai Elantra or your position lights on Hyundai Elantra, don’t be reluctant to browse our articles to help you to complete this replacement.
Replacing the rear turn signal bulb on my Hyundai Elantra
Now let’s go to the most instersting step of this content, how to change the rear turn signal bulb on Hyundai Elantra? Please note that this operation is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Hyundai Elantra, see our specific content page. On the other hand, here are the detailed steps to follow to be able to perform this process properly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Hyundai Elantra. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating effectively
.
To discover more tips on the Hyundai Elantra, take a look at the Hyundai Elantra category.
