No matter if it’s for your own safety, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are always functional is necessary. Obviously, bulbs are wearing devices that will predictably burn out in the long run and consequently need to be replaced. You’re most likely in this article because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Audi A7, we’ve written this article to teach you do it without any help without having to go to your auto technician. In a first step, we will have a look at the checking a burnt-out rear turn signal bulb on your Audi A7 and in a second step, how to replace the rear turn signal bulb on your Audi A7.
How do you know if the rear turn signal bulb on your Audi A7 is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the possibility to verify all the safety features of your Audi A7. Obviously, you are quite often in a rush and are likely to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result fundamental to make the effort to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Audi A7, but you didn’t detect it. Here are the two ordinary solutions to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Audi A7, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are efficient.
- By listening to the sound of your turn signals. Indeed, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Audi A7, you will recognize that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Audi A7 or your position lights on Audi A7, don’t be reluctant to have a look at our web content to help you to complete this replacing.
Replacing the rear turn signal bulb on my Audi A7
Now let’s go to the most instersting step of this article content, how to replace the rear turn signal bulb on Audi A7? Take note that this technique is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Audi A7, see our dedicated article content. Nevertheless, here are the full description to adhere to in order to do this act correctly:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Audi A7. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
Whenever you have any further questions about the Audi A7, do not hesitate to consult our Audi A7 category.
