No matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functioning is very important. Surely, bulbs are wearing auto parts that will surely burn out after a while and as a result need to be swapped out. You’re probably on this website because one of your rear turn signals is burnt out and you’re wondering how to change the bulb of a rear turn signal on you Chevrolet Captiva, we’ve posted this post to help you do it all on your own without having to go to your auto technician. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Chevrolet Captiva and in a second part, how to replace the rear turn signal bulb on your Chevrolet Captiva.
How do you know if the rear turn signal bulb on your Chevrolet Captiva is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the occasion to verify all the safety features of your Chevrolet Captiva. Surely, you are quite often in a rush and tend to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is therefore essential to take some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Captiva, but you didn’t perceive it. Here are the two simple ways to verify if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Chevrolet Captiva, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that notifies you of a rear turn signal bulb burnt out on your Chevrolet Captiva, you will realize that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Chevrolet Captiva or your position lights on Chevrolet Captiva, don’t be reluctant to browse our articles to help you to realize this replacing.
Changing the rear turn signal bulb on my Chevrolet Captiva
Now let’s go to the most important part of this article, how to replace the rear turn signal bulb on Chevrolet Captiva? Please note that this method is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Captiva, see our specific article. On the other hand, here are the full description to carry out in order to accomplish this work correctly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Chevrolet Captiva. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working effectively
.
To find more tips on the Chevrolet Captiva, take a look at the Chevrolet Captiva category.
