Your car’s handbrake is a mandatory safety feature based on the highway code, in fact , it aims to quit your Audi A7, even on the slight incline. It must be in addition to the main brake controls. It is also possible that with time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you could feel that it really is no longer blocking your car. To deal with these challenges, we will look at how to adjust the hand brake on your Audi A7 . To achieve this, first we will see the adjustment of the manual handbrake on Audi A7 , then simply, in a second step, how to adjust an automatic handbrake, and lastly the price of the service performed by a professional.
Adjusting a manual handbrake on Audi A7?
So we start our content with the hand brake adjustment of a Audi A7 in its manual version. This version works in a simple way which has a system of cable and screws that allow you to control the tension in the device and therefore to modify the stroke in the lever of the handbrake. To act on it you will need to act on these screws in order to expand the handbrake cable of the Audi A7 . In any case, just before adjusting the hand brake, you must check that your rear end wheels are not blocked throughout the adjustment. Please find under the detailed treatment to carry out this kind of intervention:
- At the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should see a trapdoor in your handbrake, open it up to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts in both sides, be sure to make the same changes on both sides to hold a balanced brake, and check that the hand brake lever of your Audi A7 has a stroke of about three notches.
- Tighten the locknuts and check the fastening of the tires of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get an optimal configuration
.
If you don’t have access to the handbrake flap of the Audi A7, the adjustment will probably be exactly the same but it will be done by passing underneath your car at the level of your handbrake lever. Be sure to set your car on the stand just before any actions.
How do I adjust the automatic handbrake of my Audi A7?
Second approach to handbrake adjustment in Audi A7 , this is an automatic handbrake, as opposed to the manual one, this method is done directly on the brake drums or perhaps calipers, and is expected to adapt automatically to the wear of the brake shoes or disc brake pads. It may be that if you before long have to acquire brake pads, your handbrake will lose power, allow me to share the steps to take to check if the tension of your handbrake is the appropriate one:
- Remember that an automatic handbrake can’t be adjusted straight because it is likely to adapt itself to the wear of the disc brake pads or shoes of your Audi A7.
- You can nonetheless check that the system is operating correctly by putting the car on the stand and checking out by driving under the vehicle that the disc brake pads are still in good functioning order.
- For drum brakes will probably be necessary to take apart the brakes to check the state of the shoes, all of us suggest you to have it conducted by a specialist.
- Be sure you replace your disc brake pads if you need to.
What is the price of adjusting the handbrake of Audi A7 by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it questions a safety component of your car, namely the adjustment in the handbrake of the Audi A7 , we inform you to go to a technician that can adjust your handbrake for the about fifty local currency . When you have problems with vibrations when braking on Audi A7, do not wait to consult our content which refers to this issue.
To discover more tips on the Audi A7, take a look at the Audi A7 category.
