Regardless whether it’s for your personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly working is pretty important. In reality, bulbs are wearing parts that will undoubtedly burn out over time and consequently need to be swapped out. You’re almost certainly on this site because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Subaru Outback parking light, we’ve posted this article to help you do this operation on your own and not need to go to your auto mechanic. In a first step, we will look at changing the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.

change-parking-light-subaru-outback

How to swap the front parking light bulb of my Subaru Outback?

We will begin this content page with exchanging the front daytime running light bulb of your Subaru Outback, bear in mind that according to the year and finish of your motor vehicle it may not be quite the same approach to use. In reality, whether or not the location of your bulb is not going to change, the access may be more or less difficult based on the features of your car.

First approach, we will conduct the bulb change of your daytime running light without removing the headlight of your Subaru Outback. Although this process is the simplest, it is not guaranteed that you will be able to execute it on your car without encumbrance. In reality, dependant on the options and the year, on some models there will not be enough space for you to swap the bulb by doing this. Here are the two different ways to swap the bulb of the front parking light of your Subaru Outback:.

  • Going through the bonnet of your car: First solution, you will simply go through the bonnet of your car to access your headlight unit. This is the most logical method but it is not always easy to do to realise, often because of secondary auto parts that will obstruct your access. To achieve this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been accomplished, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Subaru Outback. You may perhaps need to take off the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to take off the bulb socket from its area. To achieve this, pull gently on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can swap your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the assembly, reconnect your battery and accomplish a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Subaru Outback in cases where the access through the engine block seems too difficult. To accomplish this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these actions are finished you will only have to stick to the same technique as on the previous part to swap the front daytime running light bulb of your Subaru Outback

.

How to swap the rear parking light bulb on your Subaru Outback

Finally, if you wish to swap the rear parking light bulb of your Subaru Outback the approach is more simple, here are the different basic steps to stick to to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Subaru Outback, please go through our dedicated content page to discover how to do it.

To discover more tips on the Subaru Outback, take a look at the Subaru Outback category.