It doesn’t matter if it’s for your personal safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always working is very important. In reality, bulbs are wearing parts that will undoubtedly burn out after some time and as a result need to be swapped out. You’re likely on this site because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my Toyota Sienna parking light, we’ve written this article to help you do this action without any help and not need to go to your auto technician. In a first step, we will look into swapping the front daytime running light bulb of your car and in a second art, how to change the rear daytime running light.
How to change the front parking light bulb of my Toyota Sienna?
We will begin this article content with exchanging the front daytime running light bulb of your Toyota Sienna, take notice that depending on the year and finish of your car it may not be quite the same technique to use. In reality, whether or not the position of your bulb is not going to change, the access may be more or less challenging based on the features of your car.
First technique, we will perform the bulb change of your daytime running light without taking out the headlight of your Toyota Sienna. Although this approach is the most basic, it is not assured that you will be in a position to execute it on your car without encumbrance. In reality, based on the options and the year, on some models there will not be enough space for you to change the bulb by doing this. Here are the two different ways to change the bulb of the front parking light of your Toyota Sienna:.
- Going through the bonnet of your car: First strategy, you will simply go through the bonnet of your car to direct access your headlight unit. This is the most rational approach but it is not always easy to achieve, sometimes because of secondary parts that will obstruct your access. To achieve this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this step has been finished, you will need to access the back of your headlight unit to change the daytime running light bulb on your Toyota Sienna. You may perhaps need to take out the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take out the bulb socket from its area. To achieve this, pull gently on the socket and not on the wires (you risk damaging them), finally now that the socket is out, you can change your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once completed, reassemble the assembly, reconnect your battery and accomplish a check test before taking to the road.
- By taking out the crosshair grill and the headlight:
- Second alternative, you can remove the headlight of your Toyota Sienna if it turns out the access through the engine block seems too obstructed. To accomplish this, you just have to open your bonnet, take out the front grill held by only a few torx screws, then take out the headlight in question. Once these actions are achieved you will just have to stick to the same method as on the previous section to change the front daytime running light bulb of your Toyota Sienna
.
How to change the rear parking light bulb on your Toyota Sienna
Finally, if you desire to replace the rear parking light bulb of your Toyota Sienna the technique is much simpler, here are the different guidelines to stick to to allow you to replace this bulb:
- Unplug your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
- Place your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are operating properly again before you set off again and you’re done. If you want to change the fog light bulb on your Toyota Sienna, please go through our specific content to discover how to do it.
Whenever you have any further questions about the Toyota Sienna, do not hesitate to consult our Toyota Sienna category.
