Vehicle mirrors are one of the most crucial safety features that you must always be sure are working properly, because it is your safety, the safety of other motorists and your finances because you can be fined if you have a defective mirror. This is the case we will focus on today, you have dealt with a collision, one of your mirrors is broken and you are now wanting to know how to change a side mirror on your Subaru Outback? You are at the right spot, we will describe all the methods to help you change it in the correct way. To begin, we’ll take a look at what attracts you on this page, how to change a complete side mirror on your Subaru Outback, and then how to change only the mirror glass.
How to change a complete side mirror on my Subaru Outback?
Let’s go, we start this guide with the part that probably concerns you the most, how to change a side mirror on my Subaru Outback? This procedure is very simple and you should be capable to do it without help with a minimum of tooling. You will just need to take out the plastic cover inside your car’s interior, it is in most cases clipped on the door. For power mirrors, make sure unplug the power connector that you will see behind the cover. At last, you will have to unscrew the screws that hold the mirror, commonly there are three, a simple screwdriver should do just fine to allow you to pass this step of changing the side mirror of your Subaru Outback. Remember to keep the mirror on the outside of your car when unscrewing the last screw, so that it does not fall out. At last to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish reposition the plastic cover. That’s it, you’ve just learned how to change the side mirror of your Subaru Outback, you know now that it wasn’t that difficult.
How do you just change the window of the side mirror of my Subaru Outback?
In case you just want to change the window of the side mirror of your Subaru Outback, you will first need to determine the sort of locking of your mirror. To do this, the easiest procedure is to have a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your Subaru Outback and it uses a tongue and groove system, you are lucky, it is the least difficult unit to take out. All you have to do is to use a plastic object to take out the window “by force”.
- To put it back in place, do the same thing and push it back right into place with force. To verify that it is well installed, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Subaru Outback you will need to find the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Remember to keep the spring because it is possible that you have not one included it with your new window, replace it on your new window, take apart the old one paying attention to the electric cables in case there is defrosting system
.
- Follow the positioning guide (notch) and softly push it into its housing so as not to break it. Check that it is well installed by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can uncover the location of the swivel plate of the window to be changed on the side mirror of your Subaru Outback, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you much easier access to the device and using a screwdriver, rotate the system.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is well fixed.
To get more tips on the Subaru Outback, take a look at the Subaru Outback category.
