Modern cars are more and more equipped with technology and although this brings us comfort, we sadly as well suffer the down sides. The majority of us are uncomfortable with anything electrical on our Subaru Outback, let alone going near the fuses on it. In this article, we are going to try to help you to resolve your fuse complications and specifically to locate the power window fuse on your Subaru Outback. To achieve this, first, we are going to find out in which situations it can be important to change the window fuse of your Subaru Outback, then where the window fuse of your Subaru Outback is.
Why change the power window fuse on your Subaru Outback?
So let’s start our content on the location of the window lifter fuse of your Subaru Outback by the benefit of changing it. You might have the feeling that your fuse is blown but you are not sure. In actual fact, if you have complications with your car window, whether it is blocked, or the power window of your Subaru Outback no longer lifts , it is strongly possible that the fuse is the cause. It is important to know that a fuse operates as a safety device to avoid any overvoltage on your Subaru Outback . It will be a resistor, of a filament, more or less thick, which will let pass a specific tension and which will break if the tension is too strong. Hence the fact that they are transparent, you can check them and verify that the filament is still intact with a basic visual check. Generally, you will want to change the fuse of the window lifter of an Subaru Outback when the power window no longer functions . If your battery is operating properly, it may be the fuse that is the cause of your problem.
Where is the window winder fuse on Subaru Outback?
We will now look for the fuse in the power window of your Subaru Outback . It will often blow if your window gets stuck. The fuse is generally a 30 amp fuse. We will help you find the power window fuse on your Subaru Outback .
Position of the power window fuse of your Subaru Outback
.
We will first focus on the power window fuse on your Subaru Outback. For this you will have to go to the fuse box of your car . If you can’t find it, please be aware that it is close to your steering wheel, you will find its exact location thanks to the manual of your Subaru Outback.
- Read the manual on the cover of the fuse box to find the window fuse on your Subaru Outback , it should be noted as “power window”/”window lift control”.
- Remove the fuse in question carefully with pliers and check the state of the filament.
- If it is faulty, replace it with a new fuse, in any other case you will have to verify the state of your Subaru Outback window lift motor, or the power cables.
- After you change your car window fuse, put it back together and test your windows.
How to proceed if the power window fuse on my Subaru Outback blows after changing?
Finally, we will now find out how to proceed if the window lift fuse of your Subaru Outback is blown after replacement . Here are a few points to check yourself if you are capable to do it, in any other case take your car to your garage.
- Remove your door trim
- Check to find out if your fuse blows when it is changed or when you operate your power window.
- If it blows without you handling it, look for a short in the beam that handles this fuse
- If the fuse only blows when you operate the window lifter, look for the short circuit in the power window motor unit and in the door trim
.
.
You now know how to find the window lift fuse of your car , if you are looking for other fuses like the starter fuse on Subaru Outback, or the air conditioning fuse, don’t think twice to seek advice from our web content dedicated to these fuses.
If you need more tutorials on the Subaru Outback, go to our Subaru Outback category.
