Regardless of it’s for your own safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always functional is fundamental. Indeed, bulbs are wearing parts that will undoubtedly burn out over time and consequently need to be replaced. You’re probably here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Mitsubishi Outlander parking light, we’ve made this article to help you do this procedure on your own and not need to go to your auto mechanic. In a first part, we will take a look at swapping the front daytime running light bulb of your car and in a second section, how to swap the rear daytime running light.

change-parking-light-mitsubishi-outlander

How to swap the front parking light bulb of my Mitsubishi Outlander?

We will commence this article content with exchanging the front daytime running light bulb of your Mitsubishi Outlander, take note that depending on the year and finish of your car it may not be quite the same method to use. Indeed, regardless if the location of your bulb is not going to change, the access may be more or less problematic depending on the features of your car.

First method, we will perform the bulb swap of your daytime running light without getting rid of the headlight of your Mitsubishi Outlander. Although this approach is the simplest, it is not guaranteed that you will be able to perform it on your car without trouble. Indeed, depending on the versions and the year, on some versions there will not be enough space for you to swap the bulb that way. Here are the two different techniques to swap the bulb of the front parking light of your Mitsubishi Outlander:.

  • Going through the bonnet of your car: First approach, you will simply go through the bonnet of your car to direct access your headlight unit. This is the most rational technique but it is not always easy to do to achieve, often because of secondary parts that will obstruct your access. To do this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Mitsubishi Outlander. You may perhaps need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to remove the bulb socket from its location. To do this, pull carefully on the socket and not on the wires (you risk damaging them), finally when the socket is out, you can swap your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the assembly, reconnect your battery and accomplish a check test before taking to the road.
  • By getting rid of the crosshair grill and the headlight:
  • Second solution, you can remove the headlight of your Mitsubishi Outlander in cases where the access through the engine block seems too complicated. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are achieved you will just have to follow the same method as on the previous section to swap the front daytime running light bulb of your Mitsubishi Outlander

.

How to swap the rear parking light bulb on your Mitsubishi Outlander

Finally, if you wish to swap the rear parking light bulb of your Mitsubishi Outlander the process is incredibly easier, here are the different steps to follow to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Verify that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Mitsubishi Outlander, please go through our specific article content to find out how to do it.

To find more tips on the Mitsubishi Outlander, take a look at the Mitsubishi Outlander category.