Regardless of it’s for your own safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly working is fundamental. In reality, bulbs are wearing parts that will undoubtedly burn out over time and consequently need to be swapped out. You’re likely on this website because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Ford Transit Connect parking light, we’ve posted this content to help you do this operation without any help and not need to go to your motor mechanic. In a first step, we will take a look at changing the front daytime running light bulb of your motor vehicle and in a second section, how to change the rear daytime running light.
How to change the front parking light bulb of my Ford Transit Connect?
We will start this article content with swapping the front daytime running light bulb of your Ford Transit Connect, remember that based on the year and finish of your motor vehicle it may not be quite the same method to use. In reality, even if the location of your bulb is not going to change, the access may be more or less problematic depending on the features of your car.
First method, we will perform the bulb swap of your daytime running light without taking out the headlight of your Ford Transit Connect. Although this approach is the most simple, it is not assured that you will be able to execute it on your vehicle without trouble. In reality, depending on the options and the year, on some versions there will not be enough space for you to change the bulb that way. Here are the two different ways to change the bulb of the front parking light of your Ford Transit Connect:.
- Going through the bonnet of your car: First approach, you will simply go through the bonnet of your vehicle to direct access your headlight unit. This is the most logical process but it is not always easy to achieve, sometimes because of secondary auto parts that will obstruct your access. To get this done, here are the guidelines to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been completed, you will need to access the back of your headlight unit to change the daytime running light bulb on your Ford Transit Connect. You may possibly need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to remove the bulb socket from its location. To get this done, pull delicately on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can change your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once accomplished, reassemble the set up, reconnect your battery and perform a check test before taking to the road.
- By taking out the crosshair grill and the headlight:
- Second solution, you can remove the headlight of your Ford Transit Connect in cases where the access through the engine block seems too challenging. To do this, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these steps are finished you will only have to stick to the same technique as on the previous part to change the front daytime running light bulb of your Ford Transit Connect
.
How to change the rear parking light bulb on your Ford Transit Connect
To finish , if you desire to swap the rear parking light bulb of your Ford Transit Connect the approach is much simpler, here are the different guidelines to stick to to allow you to swap this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
- Put in your brand-new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Verify that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Ford Transit Connect, please go through our dedicated content page to discover how to do it.
If you wish more tutorials on the Ford Transit Connect, go to our Ford Transit Connect category.
