Whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are all the time functional is extremely important. Indeed, bulbs are wearing auto parts that will surely burn out after some time and as a consequence need to be changed. You’re probably on the website because one of your parking lights is burnt out and you’re wondering how to change your Volvo XC60’s license plate bulb, we’ve written this content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volvo XC60.
How to replace the license plate bulb on your Volvo XC60 through the outside
This process is the quickest of the two, actually, for this one you will just need to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this article content to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Volvo XC60. Whether it’s the front or the back of your vehicle the process will be similar.
Here are a few simple actions to stick to to perform this service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch assigned for this intent (commonly on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volvo XC60
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are worried of damaging a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the achievement of the procedure.
.
How to replace the number plate bulb on your Volvo XC60 without outside access
Second part of our item, replace this license plate bulb on your Volvo XC60 without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Volvo XC60
To replace the one on the front plate, nothing could be simpler, you will have to put yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, commonly kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to replace the rear license plate bulb on my Volvo XC60
Finally last option, you must replace the bulb on the backplate of your Volvo XC60, but you simply cannot open the cover from the outside of your vehicle. In this instance, here is the process to carry out this operation:
- Disconnect the battery from your Volvo XC60
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Volvo XC60, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for swapping license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this document. If you can’t do it, don’t hesitate to go to your garage it would be a shame to break a part of your Volvo XC60. If you want to change other bulbs like the position light bulbs on your Volvo XC60 or the low beam bulbs on Volvo XC60, don’t hesitate to consult our content articles which explain you the process to follow.
If perhaps you have any further questions about the Volvo XC60, do not hesitate to consult our Volvo XC60 category.
