Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are all the time functional is really important. In reality, bulbs are wearing parts that will inevitably burn out with time and as a result need to be replaced. You’re almost certainly on the website because one of your parking lights is burnt out and you’re wondering how to change your Kia Niro’s license plate bulb, we’ve written this article to help you do it on your own and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Kia Niro.
How to change the license plate bulb on your Kia Niro through the outside
This method is the quickest of the two, actually, for this one you will only require to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this content page to describe the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Kia Niro. Regardless whether it’s the front or the back of your car the operation will be similar.
Here are a few simple guidelines to follow to execute this maintenance:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Kia Niro
- Use your screwdriver or knife to remove the bulb from its place, in the event you are scared of destroying anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the achievement of the procedure.
.
How to change the number plate bulb on your Kia Niro without outside access
Second part of our item, replace this license plate bulb on your Kia Niro without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Kia Niro
To change the one on the front plate, nothing could be simpler, you will have to position yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much force otherwise you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Kia Niro
Finally last possibility, you must change the bulb on the backplate of your Kia Niro, but you simply cannot open the cover from the outside of your car. In such a case, here is the solution to conduct this operation:
- Disconnect the battery from your Kia Niro
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Kia Niro, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main ways for swapping license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Kia Niro. If you wish to change other bulbs like the position light bulbs on your Kia Niro or the low beam bulbs on Kia Niro, don’t hesitate to read our content articles which describe you the operation to follow.
If you wish more tutorials on the Kia Niro, go to our Kia Niro category.
